DH3500 INOX DryFan 45 Litre Stainless Steel Desiccant Dehumidifier

Stainless steel. 220V supply 50 Hz that can be run off a 12V DC-220V AC converters or 110V to 220V transformers, auto power reset in case of power supply interruption. “4-hole” technology commercial desiccant dehumidifier; water removal 45 liters maximum extraction. Operating range from -20?C up 40?C maximum room temperature for continuous drying applications, with 380 m3/hr air volume capacity (400 m3/hr – exhaust / 125m3/hr – regen air flow). Highly efficient, very quiet fan operation and yet low energy consumption in use for large moisture extraction capacity. 58dB Process air in 125mm – Process air out 125mm – Exhaust air 80mm – Regen air 80mm

Description
install dehumidifiers dehumidifiers by Ecor Pro
download user manual dehumidifiers by Ecor Pro
compare our products dehumidifiers by Ecor Pro
dh3500 epd200 in position dehumidifiers by Ecor Pro

NO WATER PRODUCED. MOISTURE IS VENTED AWAY EVEN UPWARDS

Ideal Flood Restoration, Sea Vessles & Catering Applications

45 Litre Desiccant Dehumidifier 220V / 50Hz

Equivalent to a 90 Litre Compressor Dehumidifier @18°C

Free Standing or Installed

Industrial dehumidifier DH3500 INOX stainless steel construction with tough epoxy paint finish.

Very small for its 45 litre capacity. Will dry 247 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F. Perfect for any climate.

Stainless Steel Inside & Out
Tough Enough Even for Hiring or Restoration

Can be carried by one person and transported easily with the carrying handles.

Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively

4 Hole Dehumidifier

Input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 80mm / 3″ duct.Regen air can also be ducted into the dehumidifier with a 80mm / 3″ duct.

Ecor Pro’s research shows that the DH3500 INOX will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers

Parts Associated

Features Explained

Highly Compact – Perhaps the smallest 45 Litre dehumidifier in the market.

Dust Filter – The desiccant industrial dehumidifier benefits from a simple reticulated dust filter in metal frame that can be shaken clean or easily replaced to prevent dust particles entering the unit and impeding performance.

Easy Repair – Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the DH3500 dehumidifier. Cord sets can be replaced in around 20 minutes

On Four Feet – Anti scratch plastic feet.

Carrying Handle – Easy to carry by one person. The handle can be removed if the product is being installed. The handles also protect the dehumidifier duct flanges if in transit.

Humidistat Connection – There is no integral humidistat but one can be added very simply. A military standard connector is on the front of the unit.To add this use the remote humidistat EPHUM220.This will turn the dehumidifier on an off automatically.

Duct Air-In & Out – The dehumidifier has all ducts fitted with flanges to allow ducting to be added with 125mm / 5″ hard or flexible ducting.

Wet Air Exhaust – The DH35XX has one internal fan compared to two in the DH35XX. Both do not produce water. The moisture is vented away allowing it to work in colder temperatures. The moisture is purged from the system by 15% of the process air so will dry with slight negative pressure.

“Four Hole System” – The system is classed as a “4 hole” system due to the two inlets and two outlets.

Regen Filter Housing – The Regen filter housing is a recent addition to the DH35XX model.It can be detached if not required.Used for certain applications.

Power Supply – 220V supply 50Hz

Auto Reset – If there is an interruption to the power supply, the DH35XX will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.

All Metal Construction – All metal stainless steel inside & outside. Designed for longevity.

4m / 12′ Power Cord – no need to join cables when placed for instance in crawl spaces or lofts in the home for example.

Additional information
Weight 20.5 kg
Dimensions 44.5 × 35.2 × 34.5 cm
(L x W x H)-(weight)

24.82" x 13.86" x 13.58" – 45.19lbs

Technology

Desiccant

Max Extract

45L-95pt

Power / Plug / Cord length

1500W, 220V, 50Hz, 6.5A / Yes BS/EU

Barcode

UK EAN 5060224950616, EU EAN 5060224951613

Colour / Material

Stainless Steel

Duct Sizes

80mm (3.0")-125mm (5")

Swimming Pool Ready

No

Humidistat Inside / Humidistat Option

No / Yes

Carrying Handle / Water Container / Power Cord Length

Yes / No / 5

Fan Speeds / Sound

1 / 58dB

Operting Temperature

Minus 20?C to plus 40?C

Power Out Restart / Works From DC-AC Coverter

Yes / Yes

Airflow m3/hr

400 process / 125 exhaust

Power Out Restart

Yes

Works From DC-AC Coverter

Yes

Water Tank

No

Material

Stailess steel

Approval

CE

You recently viewed...