EPD200-PRO DryFan 200 Pint Stainless Steel Desiccant Dehumidifier

120V supply 60 Hz that can be run off a 12V DC-110V AC converters , auto power reset in case of power supply interruption. “4-hole” technology commercial desiccant dehumidifier; water removal (at 80°F / 60% RH – AHAM) – 74 pints/day (35 liters); 95 pints/day (46 litres) maximum extraction. Operating range from -4°F up 104°F maximum room temperature for continuous drying applications, with 309 CFM air volume capacity (235 CFM – exhaust / 74 CFM – regen air flow). Highly efficient, very quiet fan operation (58dB) and yet low energy consumption in use for large moisture extraction capacity. 58dB Process air in 5″ – Process air out 5″ – Exhaust air 3″ – Regen air 3″

install dehumidifiers dehumidifiers by Ecor Pro
download user manual dehumidifiers by Ecor Pro
compare our products dehumidifiers by Ecor Pro
dh3500 epd200 in position dehumidifiers by Ecor Pro

NO WATER PRODUCED. MOISTURE IS VENTED AWAY EVEN UPWARDS

Ideal Flood Restoration, Sea Vessles & Catering Applications

95 Pint Desiccant Dehumidifier 110V / 60Hz

Equivalent to a 200 Pint Compressor Dehumidifier @65°F

Free Standing or Installed

Industrial dehumidifier EPD200 PRO stainless steel construction with tough epoxy paint finish.

Very small for its 95 pint capacity. Will dry 247 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F. Perfect for any climate.

Stainless Steel Inside & Out
Tough Enough Even for Hiring or Restoration

Can be carried by one person and transported easily with the carrying handles.

Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively

4 Hole Dehumidifier

Input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 80mm / 3″ duct & Regen air input also 80mm / 3″

Ecor Pro’s research shows that the EPD200 PRO will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers

Parts Associated

Features Explained

Highly Compact – Perhaps the smallest 95 pint dehumidifier in the market.

Dust Filter – The desiccant industrial dehumidifier benefits from a simple reticulated dust filter in metal frame that can be shaken clean or easily replaced to prevent dust particles entering the unit and impeding performance.

Easy Repair – Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the EPD200 dehumidifier. Cord sets can be replaced in around 20 minutes

On Four Feet – Anti scratch plastic feet.

Carrying Handle – Easy to carry by one person. The handle can be removed if the product is being installed. The handles also protect the dehumidifier duct flanges if in transit.

Humidistat Connection – There is no integral humidistat but one can be added very simply. A military standard connector is on the front of the unit.To add this use the remote humidistat EPHUM220.This will turn the dehumidifier on an off automatically.

Duct Air-In & Out – The dehumidifier has all ducts fitted with flanges to allow ducting to be added with 125mm / 5″ hard or flexible ducting.

Wet Air Exhaust – The EPD200 has two internal fans compared to one in the EPD150. Both do not produce water. The moisture is vented away allowing it to work in colder temperatures. The moisture is purged from the system by Regen air.

“Four Hole System” – The system is classed as a “four hole” system due to the two inlets and two outlets. The advantage of a four hole system is that places can be dried pressure neutrally. The EPD200 can there for be used to dry large fridge freezer for instance.

Power Supply – 110V supply 60Hz

Auto Reset – If there is an interruption to the power supply, the EPD200 will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.

All Metal Construction – All stainless steel metal construction for strength inside & outside. Designed for longevity.
 
4m / 12′ Power Cord – no need to join cables when placed for instance in crawl spaces or lofts in the home for example.
Weight 20.5 kg
Dimensions 44.5 × 35.2 × 34.5 cm
(L x W x H)-(weight)

24.82" x 13.86" x 13.58" – 45.19lbs

Technology

Desiccant

Max Extract

45L-95pt

Power / Plug / Cord length

1400W, 110V, 60Hz, 11.7A / Yes BS/EU

Barcode

UPC 860001398076

Colour / Material

Stainless Steel

Duct Sizes

80mm (3.0")-125mm (5")

Swimming Pool Ready

No

Humidistat Inside / Humidistat Option

No / Yes

Carrying Handle / Water Container / Power Cord Length

Yes / No / 12"

Fan Speeds / Sound

1 / 58dB

Operting Temperature

Minus 4?F to plus 104?F

Power Out Restart / Works From DC-AC Coverter

Yes / Yes

Airflow CFM

309

Power Out Restart

Yes

Works From DC-AC Coverter

Yes

Water Tank

No

Material

ETL, CETL

You recently viewed...