NO WATER PRODUCED.MOISTURE IS VENTED AWAY EVEN UPWARDS
Ideal for Flood Drying, Building Maintenance & Storage
17 Stainless Steel Desiccant Dehumidifier 110V / 60Hz
Equivalent to a 30 Litre Compressor Dehumidifier @68°F
Free Standing or Installed
Industrial dehumidifier EPD30 stainless steel construction .
Very small for its 17 Pint capacity. Will dry 247 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F. Perfect for any climate.
Stainless Steel Inside & Out
Tough Enough Even for Hiring or Restoration
Can be carried by one person and transported easily with the carrying handles.
Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively
3 Hole Dehumidifier
Input process air is dust filtered & dried. Input air can be ducted in & out with a 125mm / 5″ duct. Wet air exhaust is 40mm / 1.5″ duct
Ecor Pro’s research shows that the EPD30 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers
- EPHUM24DF Humidistat for DH8XX, DH12XX, EPD30, EPD50 £99.99
- Flexible Industrial Ducting 45mm / 1.5" Diameter Length 1m / 3' £29.99
- Flexible Industrial Ducting 45mm / 1.5" Diameter Length 2m / 6' £29.99
- Flexible Industrial Ducting 125mm / 5" Diameter Length 3m / 9' £99.99
- Flexible Industrial Ducting 125mm / 5" Diameter Length 6m / 18' £139.99
- Filter Three Pack for DH12XX, DH8XX, EPD30, EPD50 £29.99
- Top Cover Without Handle DH8XX INOX, EPD30-PRO Stainless Steel £34.99
Highly Compact – Perhaps the smallest 17 Pint dehumidifier in the market.
Dust Filter – The desiccant industrial dehumidifier benefits from a simple reticulated dust filter in metal frame that can be shaken clean or easily replaced to prevent dust particles entering the unit and impeding performance.
Easy Repair – Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the dehumidifier.
On Four Feet – Anti scratch plastic feet that are design Patented.Swivel out to provide anchor points for the dehumidifier.
Carrying Handle – Easy to carry by one person. The handle can be removed if the product is being installed and replaced by a top lid without handle.
Humidistat Connection – There is both and internal humidistat fitted & the possibility to put on an external humidistat but one can also be added very simply. A jack plug connector is on the on the humidistat EPHUM24DF. This will turn the dehumidifier on an off automatically remotely if the dehumidifier is concealed or ducted in position.
Duct Air-In & Out – The dehumidifier has all ducts fitted with flanges to allow ducting to be added with 125mm / 5″ hard or flexible ducting.
Wet Air Exhaust – The has one internal fan. The moisture is vented away allowing it to work in colder temperatures. The moisture is purged from the system by 15% of the process air so will dry with slight negative pressure.
“Three Hole System” – The system is classed as a “three hole” system due to the one inlet and two outlets.
Note that the EPD50 dehumidifiers have a process air outlet flange.The EPD30 models do not.This allows dry air to be ducted into a space.